COMPLETE CLEANING SECTIONS
MATERIAL HANDLING AND MISC. EQUIPMENT
The Decoiler consists of a mandrel with a new pneumatic PNDUM, TIC, pneumatically controlled, as well as a controlled down-hold roll paper, up-corner, and a traverse table to pass the strip to the welding position. The uncoiled has a center control guide.
After the strip is fastened to the core, the down hold roll retracts, and the line can be switched to automatic mode. The up-coiler is fitted with an edge guide system to assure edge-on-edge up- coiling.
A paper interleaf feed is provided. A provided two-arm turnstile accepts a finished coil, and rotates to a free arm position toward the up-coiler. The finished coil is pushed off the mandrel by a stripper plate on the turnstile arm.
WRINGER ROLL SET
These are built in heavy welded stainless steel construction with top and bottom wringer rolls. The design allows for quick roll changes. The lower roll has fixed bearing and can be pulled out through the side. The top roll lifts off vertically, allowing the strip to remain in position.
A set of Wringer Rolls, consisting of two rolls, is mounted in a heavy stainless steel frame. The upper roll is pneumatically lifted. The lower roll is fixed. Both rolls are removed through the side of the frame. A VFQ motor drives the lower roll, of which the diameter is 8 inches.
This unit is designed for a rubber wringer set, followed by a non-woven wringer set. The lower rolls are driven. In order the keep the roll surfaces wet, the top and bottom non-woven rolls have irrigation bars operated by remote valves.
DI - WATER RINSE UNIT
The complete stainless steel cold water rinse unit works in recirculation. It includes a water reservoir and pump, as well as make-up water connection and dry run protection for the pump. The rinse unit has a conductivity monitor and controller. It adds DI – water automatically.
HIGH PERFORMANCE STRIP DRYER; COMPACT
This unit, built with strong, welded steel construction, operates in recirculation. The system functions without heat elements; rather, the air is heated through static compression.
The air inlet before the filter allows for adjustable fresh air volume.
Features of air knives: