Non-woven abrasive belts are essential for metal finishing, deburring, edge rounding, and surface preparation. This guide shows how to use them efficiently to improve surface quality, production speed, and equipment lifespan.

Step 1: Select the Right Belt

  • Choose belt grit and fiber type based on the material:

    • Fine grit for polishing stainless steel or aluminum.

    • Medium grit for deburring steel strips.

  • Use Atlantech’sNon-Woven Abrasive Brushes for complementary finishing.

Step 2: Proper Belt Installation

  • Mount the belt securely on rollers or belt machines.

  • Ensure correct alignment to prevent edge fraying or uneven wear.

  • Check tension—firm but not overstretched.

Step 3: Adjust Speed and Pressure

  • Speed: Match belt speed to material type and thickness.

  • Pressure: Apply light, consistent pressure to prevent gouging.

  • Use AtlantechFlap Brushes orConvolute Brushes for edge or contour work.

Step 4: Technique for Uniform Finishing

  • Move the belt smoothly and consistently across the surface.

  • For strips or coils, use a continuous feed system for even treatment.

  • Combine withDisc Brushes for precision edge rounding.

Step 5: Belt Maintenance

  • Clean belts regularly to remove metal dust and debris.

  • Inspect belts for wear or fraying.

  • Rotate belts in multi-belt systems for even wear.

  • UseSuper Soft Brushes for delicate final polishing.

Industrial Applications

  • Metal Strip Lines: Deburring and surface polishing.

  • Coil Processing: Prepares steel and aluminum strips for coating or painting.

  • Edge Finishing: Rounds edges safely on strips and sheets.

  • High-Volume Production: Non-woven belts integrate withAtlantech Complete Systems for automated finishing.

Tips for Maximum Efficiency

  • Use the correct belt grit for your material.

  • Avoid excessive pressure to prolong belt life.

  • Keep surfaces clean for consistent finish.

  • Pair belts with appropriateCombi Brushes for multi-step finishing.

Atlantech Process Solutions

Atlantech offers a wide range of non-woven abrasive products including:

These solutions integrate seamlessly with industrial belt lines for consistent, high-quality finishes.

Conclusion

Using non-woven abrasive belts properly ensures high-quality surface finishes, safer edges, and efficient production. Combining belts with Atlantech Process brushes and systems provides a complete finishing solution for industrial metal producers.

Download your full guide and explore Atlantech Process solutions atatlantechprocess.com.