Next generation surface cleaning & finishing process technology

  • Cleaning
  • Degreasing
  • Deoxidizing
  • Descaling
  • Polishing
  • Finishing

Strip / sheet / plate / large and small parts

With the advancements of new alloys & market demands, APT can assure line operators the ability to react rapidly and produce top quality products.

Modular design lets you replace obsolete machinery, to optimize the existing process.

EFFICIENT LINE SPEEDS / INNOVATIVE AUTOMATION / CONSISTENT HIGH QUALITY / COST EFFECTIVENESS

IF YOUR LOOKING FOR MACHINERY THAT REDUCES YOUR OPERATING COST, YOU SHOULD CALL US!

Process Technology – Coil / Strip / Sheet / Plate / Parts

  • PRODUCTION PROCESS OPTIMIZATION
  • INCREASE LINE SPEED
  • IMPROVE SURFACE QUALITY PRODUCTION
  • REDUCE OVERHEAD PRODUCTION COST
  • USED IN DRY OR WET CONDITIONS AND IN CONNECTION WITH OILS AND/OR MILD DETERGENTS
  • INCREMENTAL PROCESS IMPROVEMENTS
  • REDUCE MAINTENANCE REQUIMENTS
  • REDUCE CLEANING MEDIUM COSTS
  • STABLE, PREDICTABLE, MEASURABLE PROCESS

Key Features

  • STATE-OF-THE-ART AUTOMATION
  • RELIABLE PRECISION CONTROLS
  • ROBUST CONSTRUCTION & DESIGN
  • ACCURATE BRUSH ENGAGEMENT ON STRIP FOR MAXIMUM BRUSH ECONOMY
  • BRUSH DRESSING – MANUAL OR AUTOMATIC
  • ACCURATE GRAPHICS TO SHOW BRUSH SURFACE ENGAGEMENT
  • QUICK BRUSH CHANGE
  • STABLE, PREDICTABLE, MEASURABLE PROCESS
  • TURN KEY CLEANING SECTIONS  /  INDIVIDUAL MODULES
  • REMOVAL OF SURFACE – DIBRIS  /  OIL  /  ROLLING RESIDUES  /  IRON FINES  /  OXIDES / SCALE
  • PRE-RINSE > SCRUBBER BRUSH > RINSE > DRY
  • DEGREASING  /  BRUSHING  /  PICKLING  /  SURFACE ACTIVATION  /  ALKALI  /  ETCHING
  • STEEL  /  STAINLESS  /  ALUMINUM  /  COPPER  /  TITANIUM  /  ALLOYS  /  RUBBER  /  CERAMIC
Show AllCoil GrindingComplete SystemSheet GrindingSheet/Plate ProcessingStrip ProcessingToothed Belt Grinding

Details

Technology

Technology

• CHATTER FREE

• ACCURATE BRUSH ENGAGEMENT ON STRIP FOR MAXIMUM BRUSH ECONOMY

• BRUSH DRESSING – MANUAL OR AUTOMATIC

• ACCURATE GRAPHICS TO SHOW BRUSH SURFACE ENGAGEMENT

• QUICK BRUSH CHANGE

Chatter

The strip surface must not show chatter marks from brushing! A well-designed machine will have rigid, torsion-free frame holding bearings and positioning devices. This is the result of experience in designing, building and operating these machines.

Maintenance

We are frequently told by process line maintenance personnel about the difficulty of changing brushes or bearings on their equipment as well as component replacement. This is due, in part, to the retirement of the old guard, and the inexperienced replacements.

As machine builders, we are sensitive to the task of designing problem areas of the past out of future machines.

Performance

We pay attention to brush performance and the effective use of abrasive and nonabrasive media. Whether non-woven or bristle, we design the brush for their specific applications to maximize cleaning and use of the available media.

Material Type

Material Type

Flat Material Type

Coil, Strip, Plate, Sheet, Foil, Large & Small Parts:

  • . Stainless Steel
  • . Carbon Steel
  • . Aluminum
  • . Copper
  • . Titanium / Specialty Metals
  • . Aircraft Parts
  • . Automotive Parts
  • . Clutch Linings
  • . Press Plates
  • . Carbon Fiber Sheets
  • . Ceramic Substrate
  • . Floor Coverings
  • . Rubber Sheets
  • . Rubber Timing / Drive Belts
  • . Seals
  • . Plastics
  • . Decorative / Technical Laminate Industry
  • . Textiles
  • . Wood
  • . Special Applications
Process Applications

Process Applications

Complete & Modular Cleaning Section Equipment for:

  • . Pre-Cleaning
  • . Cleaning
  • . Brushing
  • . Surface activation
  • . Removal of reside residues
  • . Degreasing
  • . Iron fines removal
  • . Pickling
  • . Etching
  • . Grinding
  • . Rinsing
  • . Drying
  • . The removal of oxides & rolling residuals
  • . Control of the oxide layer & removal of oxides
  • . Removal of oil, grease, other protectie coatings, rolling residuals, dirt from the strip / sheet surface
  • . Strip surface activation Prior to coating
  • . Strip, sheet or plate surface preparation prior to cladding, coating or pressing
  • . Oxide removal, polishing, and finishing of hardened and tempered strips
  • . Oxide removal, polishing, and finishing, and application of decorative sur faces
  • . Heavy duty descaling prior to acid pickling
  • . Heavy duty descaling between acid tanks
  • . Scale and dirt removal prior to rolling
  • . Spray degreasing
  • . Chemical free degreasing means of hot water – high pressure
  • . Spray pickle
  • . Scrubber brush machine
  • . Alkali degreasing brush machine for metal coil / strip
  • . Surface passivation
  • . Dryer
  • . Electro galvanizing line for steel coil / strip:
    • . Electrolytic degreasing
    • . Electrolytic pickling
  • . Pickle Flat metal narrow coil / strip
  • . Annealing, degreasing, and pickling line for:
    • . Copper
    • . Copper alloys
  • . Heavy duty brush grinding / scale removal in pickling line for:
    • . Stainless steel coil / strip
Process Lines

Process Lines

Complete & Modular Equipment for the Following Process Lines:

 

Carbon Steel:

  • . SPM – Skin Pass Mill
  • . TM – Tandem Mill
  • . CGL ( HDGL ) – Hot Dip Galvanizing Line
  • . CAL – Continuous Annealing Line
  • . CL – Cleaning Line
  • . DL – Degreasing Line
  • . ETL – Electrolytic Tinning Line
  • . EGL – Electro Galvanizing Line
  • . ECL – Electrolytic Cleaning Line
  • . CPL – Continuous Pickle Line
  • . CCL – Continuous Coating Line
  • . PL – Pickling Line

Stainless Steel:

  • . SPM – Skin Pass Mill
  • . TM – Tandem Mill
  • . CCL – Continuous Coating Line
  • . HAPL – Hot Annealing & Pickling Line
  • . CAPL – Cold Annealing & Pickling Line
  • . CL – Cleaning Line
  • . BAL – Bright Annealing Line

Aluminum:

  • . CRM – Cold Rolling Mill
  • . HRM – Hot Rolling Mill
  • . HRFM
  • . HFM
  • . TLL – Tension Leveling Line
  • . SL – Slitting Line
  • . CCL – CROSS CUTTING
  • . CM – Cold Mill
  • . APL – Annealing & Pickling Line

Non-Ferrous:

  • . HCM
  • . CL – Cleaning Line
  • . DPL – Degreasing & Pickle Line
  • . APL – Annealing & Pickling Line
  • . CPL – Continuous Pickle Line
  • . FL
  • . HRM – Hot Rolling Mil
  • . CTL – Continuous Tinning Lines
Downloads

Downloads

Brush Machine Brochure
BRUSH MACHINE
OVERVIEW VIEW

Metal Strip and coil cleaning section process equipment brochure
MODULAR STRIP
PROCESS TREATMENT EQUIPMENT
Hot water high pressure chemical free precleaners brochure
HOT WATER – HIGH PRESSURE PRE-CLEANING /
DEGREASING CHEMICAL FREE

AFTER POT COOLING (APC) TOWER TURN ROLL SURFACE CLEANING BRUSH MACHINE BROCHURE
AFTER POT COOLING (APC)
TOWER TURN ROLL
SURFACE CLEANING
Metal Sheet and metal parts process equipment for degreasing, brushing, cleaning, and drying
SHEET / PLATE PROCESS EQUIPMENT
DEGREASE | RINSE | BRUSH | RINSE | DRY

Precision Grinding Machines
PRECISION GRINDING
MACHINES MACHINE
Copper Strip bath filtration and regeneration
COPPER CHEMICAL BATH PROCESS

Scrubber brushing machine and non-woven abrasive brush flyer
RETHINKING BRUSHING FLYER

Sign up for our weekly newsletter

We take great pride in educating our loyal customers to further optimize their production process. Sign Up and recieve:

    By subscribing I agree to the privacy terms and give my consent to receive Atlantech Processing e-mails with the latest downloadable resources, events and reports.

    APT - Popup Close Icon